Mandatory Specs: (refer to diagrams above)

1. To work over in. (mm) diameter shaft.

2. OUTSIDE DIAMETER: 

    a. in. (mm) max. or

    b. in. (mm) +or- in. (mm)

3. INSIDE DIAMETER: 

    a. in. (mm) min. or

    b. in. (mm) +or- in. (mm)

4. Torque:   lb.• in (N•mm) +or- lb.• in (N•mm) @

Θ_{1 =} °

    Torque:   lb.• in (N•mm) +or- lb.• in (N•mm) @

     Θ_{1 =} °

5. Length of space available: in. (mm)

6. Maximum wound position turns or ° from free position.

7. Length of moment arm (R) in. (mm)

8. Direction of helix (L, R) or optional:  

9.Type of ends:

Advisory Data:

1. Wire diameter: in. (mm)

2. Mean coil diameter: in. (mm)

3. Number of coils:

4. Rate: lb.-in. (N•mm) per turn (360°).

5. Θ_F: ° free angle reference
 

Special Information:

1. Type of material:

2. Finish:

3. Frequency of rotation, cycles/sec, and working range,

    Θ = ° to Θ = ° deflection.

4. Operating temp: °F

5. End use of application:

6. Other: